NetWare Settings | Configuration of the NetWare protocol |
|
|
NetWare Mode
Determine if the operation mode of the Fast EtherNet is a print server mode (PSERVER) or a remote printer mode (RPRINTER).
Print Server Mode | Configuration when the Fast EtherNet is used in the print server mode |
|
|
NetWare Print Server
Name
(Machine name)
In the print server mode, type in the “Print server name” recorded on the file server. Make sure that it is consistent with the print server name recorded on the file server. The print server name can be up to 31 alphanumeric characters long.
Password
In the print server mode, this is the password used to log into the file server. Make sure it is consistent with the password set on the file server. The password can be up to 31 alphanumeric characters long.
Job Polling Rate
In the print server mode, indicate the interval of validating the print queue status. If the value set is small, more burden will be loaded on the network. If the value set is high, the printing response will deteriorate. Normally use the default. The value set is between 2 and 255 seconds.
Bindery Mode
In the print server mode, if used from the NW4.1J bindery or NW3.12J, make sure that “Enable” is selected [for the bindery mode]. Select “Disable” only when using the NW4.1J NDS.
Tree Name
In the print server mode, type in the “Tree name” which is in the file server. The tree name can be up to 31 alphanumeric characters long.
Context
In the print server mode, type in the “Context name” which created the print server. The context name can be up to 31 alphanumeric characters long.
File Server Name
In the print server mode, type in the “File server name” which manages which manages the printer. Up to 8 file servers can be set. The file server names can be up to 31 alphanumeric characters long.
104 | Fast Ethernet 7100e+ |
