Configuring the |
| Method of configuring |
Configuring in order to print from the |
| 1. Log in as the root on the workstation. |
|
|
|
If you type in a wrong IP address, subnet mask or gateway, the network may go down or other severe damage may occur. Please set the configuration only after consulting your network manager.
The following explanation relates to an example in which [the Fast EtherNet is configured to work with] OKIPAGE 8c(PS) as the printer under
In the case that there is no super user authorization, leave the configuration to the network manager.
2.The IP address of the Fast EtherNet and the host name are registered in the /etc/hosts file.
Example: In the case that the IP address is “192.168.20.127” and the host name is “OP8c”
192.168.20.127 OP8c
3.Use the ping command to confirm a connection with the Fast EtherNet.
Example: In the case that the host name is “OP8c”
#ping OP8c
In the case that there is no reply, there is a problem with the registration of the Procedure 2 IP address and the host name, or with the condition of the network. Please consult your network manager.
60 | Fast Ethernet 7100e+ |
