Functions of the DIP Switches
By using the DIP Switches of the Fast EtherNet, initialization of the Fast EtherNet, verification of its settings and the self- diagnosis test can be performed.
ON 1 2 3 4
DIP Switches behind plate
During normal operation, all the DIP Switches should be switched OFF. In order to change the settings of the DIP Switches, turn the printer’s power switch OFF. DIP Switch No. 1 is normally OFF.
Initialization of the Fast EtherNet | English | ||
| |||
1. | Turn the printer’s power switch OFF. |
| |
2. | Turn DIP Switch No. 2 ON. |
| |
3. | Turn the printer’s power switch ON. |
| |
| The Fast EtherNet is initialized. |
| |
4. | Make sure that the printer is fully operative and turn the |
| |
| printer’s power switch OFF. |
| |
5. | Turn DIP Switch No. 2 OFF. |
| |
|
|
|
|
If the Fast EtherNet was used even once with a different network, it has to be initialized before it can be used.
User Manual | 15 |
