4.After making the necessary changes, click on “Submit”.
5.Type “root” in “User name” and the last 6 digits of the EtherNet address in “Password”, and click on “OK”.
The EtherNet address (MAC address) will be displayed in the print menu of the printer.
Once the new values set are transmitted to the Fast EtherNet, the following screen is displayed. If a different message is displayed, reconfirm if the values set are appropriate.
If the EtherNet address is “00:80:92:01:00:D2”, type in “0100D2” as the password. On the screen, ******
will be displayed.
6.In order to validate the new values set, turn the printer off and then on again.
If the printer is not turned off and then on again, the Fast EtherNet will continue to use the pre- transmission setting values. Make sure to turn the printer off and then on again.
102 | Fast Ethernet 7100e+ |
