
TCP/IP setup screen | SNMPsetupscreen |
1Set whether TCP/IP is used.
2Enter the IP address in the format: “###.###.###.###”.
3Check here if IP address is to be acquired from RARP or
DHCP/ BOOTP.
4Enter the subnet mask in the format: “###.###.###.###”.
5Enter the gateway address in the format: “###.###.###.###”. If you do not use a router or gateway, enter “0.0.0.0”.
6Enter the ROOT password.
1Enter the authentic community name and trap community name.
2Enter IP address for trap address as “###.###.###.###”. If you do not use traps, enter “0.0.0.0”.
3Enter SysContact, SysName and SysLocation.
4This is the IP packet TTL value. This should not normally be changed.
5Check this option if a trap is to be issued in cases of authorisation error.
136 | Fast Ethernet 7100e+ |