Japan Tiger 7100e+ user manual NetWare 4.1 Remote Printer Mode, StartingPCONSOLEthroughNDS

NetWare 4.1 Remote Printer Mode

In order to use the NetWare 4.1 remote printer mode, it is necessary to set up the file server and the Fast EtherNet.

See other relevant topics in this chapter for:

•printing on the NetWare 4.1 print server mode through via NDS network;

•printing on the NetWare 4.1 print server mode via the bindery network;

•using NetWare 3.1.

The following description uses NetWare 4.1 as an example. Some of the on-screen indications or options may vary according to the OS version and system configuration.

In this example, the Fast EtherNet is connected to the NetWare NDS tree “ODCSOFT”, the admin user context “ENG7”, the context “SOFT22.ENG7” for creating a print server, and the file server “SOFT22NW4”.

StartingPCONSOLEthroughNDS

For the purpose of this example we will use F: as the network drive name for logging in to the NetWare server.

1On the client, go to the context where admin exists (“ENG7” in this example), using the CX command. After entering Login, input your password.

F:\>cx ENG7

2Log in to the file server (“SOFT22-NW4” in this example) by using the admin authority. After entering log-in, input your password.

F:\>Login SOFT22-NW4/admin

3Using the CX command, go to the directory where you generate the print server, printer and print queue (“SOFT22” in this example).

F:\>cx SOFT22

4Start PCONSOLE.

F:\>pconsole

[Available Options] is displayed.

English

User Manual 89