Configuration items

For the details of each item, refer to “Contents of the Fast EtherNet settings” (Page 131).

The configurable items may vary from one printer to another.

Network Connection Configuration of the Network Basics

Protocol Option

Set “Enable” or “Disable” for each protocol.

Frame Options

Set the frame type of the network.

TCP/IP Settings Configuration of the TCP/IP protocol

DHCP/BOOTP

If the IP address is automatically obtained using a DHCP/BOOTP server, set “Enable”. If a direct IP address is typed in, set “Disable”.

RARP

If the IP address is automatically obtained using a RARP server, set “Enable”. If a direct IP address is typed in, set “Disable”.

IP Address, Subnet Mask, Default GateWay

Type in the IP address, subnet mask and gateway allocated to the Fast EtherNet, with 10 digits each “***.***.***.***”. If a DHCP/BOOTP server or RARP server is used, there is no need to configure the settings.

English

User Manual

103

Page 103
Image 103
Japan Tiger 7100e+ user manual Configuration items, 103