8.Choose the “OKI Device Setup” in the “Setup” menu.
<In case that TCP/IP protocol is the only working protocol>
(1) When the next message is displayed, click on “Yes”.
(2)Type in the EtherNet address and the “IP address” which configured it, and click on “OK”.
(3) Click on “Yes” in order to validate the values set.
(4)After a while, the Fast EtherNet is displayed in the list. Select the Fast EtherNet displayed and choose the “OKI Device Setup” in the “Setup” menu.
If the Fast EtherNet is not displayed, click on the “OKI Device search” button.
English
User Manual | 41 |
