SNMP |
|
|
|
|
Authentic | Enter the Authentic Community Name, | Default value | ||
community | which is a maximum of 15 | public | ||
| characters/numbers. The set value will be |
|
| |
| displayed as "********". |
|
| |
|
|
| ||
Trap community | Enter the Trap Community Name, which can | Default value | ||
| be up to 15 characters/numbers. | public | ||
|
|
| ||
Trap address | Enter the Trap Notice Address. IP Address | Default value | ||
| ,0.0.0.0, is invalid. | 0.0.0.0. | ||
SysContact | Set | Default value | ||
| characters/numbers. | None | ||
|
|
| ||
SysName | Set | Default value | ||
| characters/numbers. | None | ||
|
|
|
|
|
|
|
|
|
|
Items |
| Function |
| Setup Value |
SysLocation |
| Set | Default value | |
|
| characters/numbers. |
| None |
|
|
|
|
|
DefaultTTL |
| Set IP Packet Existing Value (TTL Value). |
| Default value |
| Normally, use the default value. The value may | |||
|
| vary from 0 to 255 sec. |
| 255 sec. |
|
|
|
|
|
EnableAuthenTrap |
| Set whether Authentic Trap Error is permitted. | 1 : Permitted | |
|
|
|
| 2 : Not permitted |
NetWare |
|
|
|
|
NetWare protocal |
| Set whether NetWare protocol (IPX/SPX |
| ENABLE :To use the function |
|
| protocol) is used. |
| DISABLE: Not to use |
|
|
|
| the function |
|
|
|
|
|
Packet type |
| Designate the packet frame type used for |
| |
|
| NetWare. Make it identical with the frame type | ||
|
| of the existing network. |
| 802.2 : IEEE802.2 |
|
|
|
| 802.3 : IEEE802.3 |
|
|
|
| SNAP : SNAP |
|
|
|
|
|
NetWare mode |
| Choose Ethernet Board operating mode for |
| PRINTER : |
|
| NetWare from Print Serer Mode or Remote |
| Remote Printer Mode |
|
| Printer Mode. This setting should coincide with | PSERVER : | |
|
| that on NetWare Server. |
| Print Server Mode |
|
|
|
|
|
Print Server |
|
| English |
FSERVER | Enter File Server Name which administer | Default value |
|
| Printer in Print Server Mode. A maximum of 8 | All None |
|
| file servers may be designated at max. The |
|
|
| value should be in 31 or shorter alphabets or |
|
|
| numbers. |
|
|
|
|
|
|
Machine name | It is the "Print Server Name" which has been | Default value |
|
| set at File Server in Print Server Mode. Make | "ML"+"last 6 digits of |
|
| sure this name is identical with the "Print | MAC Address" |
|
| Server Name" set at File Server. |
|
|
| In Remote Printer Mode, it is not used for | Default value |
|
| NetWare. In both modes, this name will be |
| |
| displayed at the utility as the machine name. | Null (No password) |
|
| The value should be in 31 or shorter alphabets |
|
|
| or numbers. |
|
|
|
|
|
|
Password | This is a password to log in File Server in Print | Default value |
|
| Server mode. Make sure this password is | 4 sec. |
|
| identical to that set at File Server. The value |
|
|
| should be set in 31 or shorter alphabets or |
|
|
| numbers. |
|
|
|
|
|
|
Job polling interval | Set the interval to poll the job status. The |
|
|
| smaller the value is, the more load on the |
|
|
| network. The larger the value is, the worse the |
|
|
| printing response. Normally, please use the |
|
|
| default value. The value may vary from 2 to |
|
|
| 255 seconds. |
|
|
|
|
|
|
User Manual | 141 |
