Japan Tiger 7100e+ user manual RestartingPCONSOLEonNDSMode, Creating a Printer

RestartingPCONSOLEonNDSMode

The following configuration is required in order to make the queue generated in bindery mode available to other context users in NDS mode.

If other NDS context users do not need to use the device then the following configuration is not required. Proceed to “Setting Fast EtherNet”.

1Press the ESC key until [Exit?] is displayed on the screen, then select [Yes] and press Enter.

2Log out from the file server.

F:\> Logout

3Using the CX command, go to the directory where admin is to be found (“ENG7” in this example).

F:\> cx ENG7

4Log in again to the file server (“SOFT22-NW4”) in NDS mode as admin.

After entering Login, input your password.

F:>\Login SOFT22-NW4/admin

5Using the CX command, go to the directory you specified in the bindery context (“SOFT22”).

F:\>cx SOFT22

6 Start PCONSOLE

F:\>pconsole

[Available Options] is displayed.

Creating a Printer

1Select [Printer] and press the Enter key.

2Press the Ins key and input the printer name you created in bindery mode (“OP8C” in this example), then press the Enter key.

Printer: OP8C

“OP8C” is created.

Allocating Print Queue to Printer

1Select the printer you created (“OP8C”) and press the Enter key.

2Select [Banner Type] and then press the Enter key.

3Select [Text] or [PostScript] and press the Enter key.

4Select [Allocate Print Queue] and press the Enter key.

5Press the Ins key, select the print queue you created in the bindery mode(“Q-8C”in this example) from the [Object, Class] and press the Enter key.

Object, Class

....*	(Parent)
Q-8C	(Print Queue)

The print queue is allocated.

6Press the ESC key until [Save changes?] appears on the screen, select [Yes], then press the Enter key.

English

User Manual 83