NetWare 4.1 Print Server Mode (Bindery)
NetWare 4.1 has a NDS network and a bindery network.
BinderyNetwork
In order to use NetWare 4.1 print server mode with bindery, it is necessary to set up the file server and Fast EtherNet.
•To use the bindery service, it is essential to specify the bindery context in the file server. Make the following settings from the server console in advance:
For Bindery Context “OU=SOFT22.O=ENG7” set Bindery Context = OU=SOFT22.O=ENG7
•For using the NetWare4.1 print server mode via the NDS network, see “Starting PCONSOLE through NDS” earlier in this chapter.
•For the NetWare 4.1 remote printer mode, see “NetWare 4.1 remote printer mode” later in this chapter.
•For using NetWare 3.1, see NetWare 3.1 environment later in this chapter.
The following description uses NetWare 4.1 as an example. Some of the screen shots and options may vary depending on the OS version and system configuration.
In this example, the Fast EtherNet is connected to the NetWare NDS tree “ODCSOFT”, the admin user context “ENG7”, the context “SOFT22.ENG7” for creating a print server, and the file server
StartingPCONSOLEonBindery
For the purpose of this example we will use F: as the network drive name for logging in to the NetWare server.
1Log in to the file server from the client using the bindery mode supervisor.
Log in to the file server
After entering Login, input your password.
2Start PCONSOLE.
F:\> pconsole
[Available Options] is displayed.
Available Options
Print Queues
Print Servers
Quick Setup
Change NetWare Server
80 | Fast Ethernet 7100e+ |
