Printing

1.Log into the Fast EtherNet.

When printing with ftp, you can use any values for “Name” and “Pass-word”. However, if the user name is “root”, the “Password” set under TELNET or the utility (see “Using telnet” in Chapter 7) will be required..

2.Move to the transfer directory using the cd command.

In the Fast EtherNet the transfer directory has a hierarchical structure. Please make sure to move to the transfer directory. It is not possible to output the print data to the root directory.

Example: Logging in the Fast EtherNet with a host name “OP8c” (or an IP address “192.168.20.127”).

Example: Moving to the lp directory and confirming the current directory.

#ftp OP8c (or ftp 192.168.20.127)

ftp>cd /lp

Connected to OP8c

250 Command OK.

220 Fast EtherNet 7100e+ Ver 1.0.0 FTP server

ftp>pwd

Name (OP8c:root) : root

257”/lp” is current directory

331 Password required.

ftp>

Password:

 

230 User Logged in

 

ftp>

 

68

Fast Ethernet 7100e+

Page 68
Image 68
Japan Tiger 7100e+ user manual Move to the transfer directory using the cd command