6Select the Fast EtherNet to set up from the Ethernet address list. Then select [OKI Device Setup] from the [Setup] menu.
• If you are using IPX/SPX protocol, the Fast EtherNet may not be listed if there are many NetWare file servers. In this case, select [Environment Setup] from the [Options] menu, then [NetWare] tab to register the IPX network address where the Fast EtherNet is located. Then search for the address again.
•The Ethernet address is displayed in the Fast EtherNet
•If you are using TCP/IP protocol, the Fast EtherNet may not be listed if its IP Address has never been configured. In this case, select [IP Address Setup] from the [Settings] menu and set the IP Address. Then search for the address again.
English
7 Enter the required items and click [Setup].
User Manual | 119 |