Setting Default Line to Desk Phone or PC
The Savi Office system ships with the desk phone as the default outbound line. This means any call initiated from the headset with the call control button will open desk phone audio. You can change your default outbound line from the base talk buttons.
While the system is in idle mode, press and hold the PC talk button or the desk phone talk button for three seconds to select that device as your default outbound line. The talk button indicator light will flash green for four seconds confirming the new setting.
| Desk Phone |
PC Talk Button | Talk Button |
Indicator Light | Indicator Light |
|
Placing the Headset in Sleep Mode
If you won’t be using the headset for a long duration and the headset will not be in the charge cradle, you can put the headset in sleep mode by pressing the call control button for three seconds while in an idle state. To exit sleep mode, press the headset call control button again for three seconds.
Subscription Button Indicator Light
Master headset subscribed to base | Solid green |
|
|
Base in master subscribing mode | Flashes red and green |
|
|
Base conferencing in additional guest | Flashes yellow and |
headset(s) | green |
|
|
Active conference call with guest | Solid yellow |
headsets subscribed to base |
|
|
|
Toggling On/Off Over-the-Air Subscription
The Savi Office system ships with the
Setting the Range
With the master headset docked and the system idle, press the subscription button for three seconds. Both the desk phone and the PC talk buttons will flash green for high range. If you press the subscription button again for three seconds, the talk buttons will flash yellow for medium range. If you press the subscription button again for three seconds, the talk buttons will flash red for low range.
Ending Subscription
If the base is in subscription mode (secure or
Desk Phone and PC Talk Buttons
Indicator Lights
No active audio link | Off |
|
|
Incoming call | Flashes green |
|
|
Active audio link | Solid green |
|
|
Master headset muted | Solid red |
|
|
Call | Flashes red |
|
|
Seeking Audio Link* | Solid yellow |
|
|
*When bringing up a link from the base, the talk button will be solid yellow until a link is established. This could take up to several seconds especially for wideband audio and/or when in moderate to high density environments. If you press the talk button when the indicator light is yellow, it will terminate the search for an audio link.
Plantronics Savi User Guide | 16 |