Cisco Systems SPA9000 manual Configuring Local Voice Mail Service on a SPA400, Server Port

Administering the SPA400 and Voice Mail Service	5
Configuring a SPA400 for Voice Mail Service

Configuring Local Voice Mail Service on a SPA400

You need to configure the voice mail server and set up the voice mail boxes for the users.

NOTE The settings on this page correspond to the settings on the SPA9000 Voice > Line page. See “Configuring a Line Interface for a SPA400 (PSTN or Voice Mail),” on

page 60.

SPA400 > Setup > Voicemail Server

SPA9000 > Voice > Line N

STEP 1 Connect to the SPA400 administration web server. (See “Connecting to the SPA400 Administration Web Server,” on page103.)

STEP 2 Click Setup tab > Voicemail Server.

STEP 3 Enter the following information:

•Server Port: 5090

The voice mail server uses this UDP port to listen for signalling between the SPA400 and the SPA9000. This port must be different from the port number that you entered on the SPA9000 Interface page.

•SPA9000 subscriber ID: 8888

The SPA9000 uses the subscriber ID to subscribe to the SPA400 Voice mail Server for obtaining notification.

SPA9000 Voice System Administration Guide 113