Configuring Phone Lines and Calling Routing Behavior

4

 

Configuring Line Interfaces on the SPA9000

 

 

 

 

 

Setting the Call Capacity Parameter

You can set the maximum total number of incoming and outgoing calls on each line interface. The default value is unlimited. You can set a value from 1 to 15, or leave the setting as unlimited.

NOTE The SPA9000 does not distinguish between incoming and outgoing calls for call capacity.

STEP 1 Start Internet Explorer, and then enter the IP address of the SPA9000. Click Admin Login and then click Advanced.

STEP 2 Click Voice tab > Line N, where N represents the line interface number.

STEP 3 Scroll down to the Subscriber Information section.

From the Call Capacity drop-down list, choose the maximum number of calls to allow.

SPA9000 Voice > Line: Subscriber Information

STEP 4 Click Submit All Changes.

SPA9000 Voice System Administration Guide

65

Page 67
Image 67
Cisco Systems SPA9000 manual Setting the Call Capacity Parameter, Click Submit All Changes