Cisco Systems SPA9000 manual Line 1/2/3/4 Status section

SPA9000 Field Reference

Voice tab

B

Call 1/2 Decoder	Codec used for decoding
Call 1/2 FAX	Status of the fax pass-through mode; set to No if this line is
	used for voice calls
Call 1/2 Type	Direction of the call: Inbound or Outbound
Call 1/2 Remote Hold	Indicates whether or not the far end has placed the call on
	hold: Yes or No
Call 1/2 Callback	Indicates whether the call was triggered by a call back
	request
Call 1/2 Peer Name	Name of the peer, internal station name if local phone, or
	name acquired from caller-ID
Call 1/2 Peer Phone	Phone number of the other phone involved in the call, either
	the extension if a local phone, or the number acquired from
	caller-ID
Call 1/2 Duration	Duration of the call
Call 1/2 Packets Sent	Number of packets sent
Call 1/2 Packets Recv	Number of packets received
Call 1/2 Bytes Sent	Number of bytes sent
Call 1/2 Bytes Recv	Number of bytes received
Call 1/2 Decode Latency	Number of milliseconds for decoder latency
Call 1/2 Jitter	Number of milliseconds for receiver jitter
Call 1/2 Round Trip Delay	Number of milliseconds for delay
Call 1/2 Packets Lost	Number of packets lost
Call 1/2 Packet Error	Number of invalid packets received

Voice tab > Info page >

Line 1/2/3/4 Status section

Registration State	The status of the registration on the line interface: Registered
	or Not Registered
Last Registration At	Last date and time the line was registered: mm/dd/yyyy
	hh:mm:ss
Next Registration In	Number of seconds before the next registration renewal;
	example 2672s
Message Waiting	Indicates whether you have new voicemail waiting: Yes or No
Mapped SIP	Port number of the SIP port mapped by NAT

SPA9000 Voice System Administration Guide 199