Cisco Systems SPA9000 manual Section = nstart/end/pausepause2

SPA9000 Field Reference

Voice tab

B

Internal Music Script	Script that tells the SPA9000 how to play the downloaded
	music file, in the format [section[,section[,…]]], where:
	section = [[n](start/end[/pause])][pause2]
	n = number of times to repeat the section before moving to
	the next section. Default: 1
	start/end = starting and 1+ending sample for this section;
	note that samples are numbered from 0 to total-length – 1.
	You may enter –1 or a very large number if the end of the file
	is intended as the ending sample. Default start is 0, and
	default end is end of the file.
	pause = number of samples to pause after the ending sample
	is played. Default: 0
	pause2 = additional number of samples to pause after the
	entire n repetitions of the section are played. Default: 0
	A maximum of 16 sections can be specified. Samples should
	be encoded in G711u format at 8000 samples/second. When
	all sections are played, the SPA9000 replays from the first
	section again.
	Examples:
	40000 (plays the entire file, pauses for 5s, then repeats)
	2(0/32000),3(32000/100000/4000)2000,(100000/-1)80000
Internal Music Refresh	The interval in seconds between refreshing an internal music
Intvl	session.
	Default: 0 (disables session refreshes)
Internal Music LBR Codec	Selects one low bit-rate codec as an alternative to G711u
	and G711a for playing internal music. Choices are {none,
	G729a, G726-16, G726-24, G726-32, G726-40}.
	Default: none
Internal Music Preferred	Selects which codec is the preferred choice to play internal
Codec	music. Choices are {G711u, G711a, Low Bit Rate}. Low Bit
	Rate refers to the selected <Internal Music LBR Codec>. If
	<Internal Music LBR Codec> is none, G711u is the preferred
	codec also.
	Default: G711u
Internal Music Use Pref	Forces the internal music player to use the preferred codec
Codec Only	only.
	Default: no

SPA9000 Voice System Administration Guide 217