Cisco Systems manual Do not include flat-profile…/flat-profile. The SPA9000

SPA9000 Field Reference

Voice tab

B

Phone Config XML	XML configuration to be served to the phones when they
	request the init_$MA.xml file from the SPA9000 during their
	first-time initialization (either a brand-new phone or after a
	factory reset). If this parameter is empty, the SPA9000 serves
	the normal auto-generated startup XML configuration file to
	the phone instead.
	The purpose of this parameter is to facilitate ITSP
	provisioning of new phones remotely. ITSP can simply
	include a default phone profile rule parameter in this
	parameter so that the phone can obtain it from the SPA9000
	on initial power-up. For example:
	<Profile_Rule>https://www.itsp.com/init/spa$MA.cfg</
	Profile_Rule>
	Do not include <flat-profile>…</flat-profile>. The SPA9000
	automatically adds them when serving the configuration file
	to the phones.
	Default: blank
Use LVS_PROXY	If this option is yes, the SPA9000 uses the hostname
	LVS_PROXY instead of its IP address in the Profile_Rule
	parameter that is served to the phones when they request
	init_$MA.xml during first-time initialization (when <Phone
	Config XML> is not specified). On reboot, the phones resolve
	the LVS_PROXY by querying the LAN via multicast. The
	SPA9000 replies to the query with its actual IP address. This
	allows the SPA9000 to use a dynamically-assigned IP
	address that is not fixed.
	Make sure that the phones have a compatible firmware that
	understands that LVS_PROXY is a special hostname. For
	SPA-941/942/921/922/901, use 4.1.12 or later; for SPA-841,
	use 3.1.6(KS) or later.
CTI Enable	Enables or disables the Computer Telephone Interface
	feature provided by some servers.
	NOTE If you have a SPA962 with a SPA932 console, enable
	CTI to support busy lamp field (B LF).

SPA9000 Voice System Administration Guide 223