Cisco Systems SPA9000 Default 420@-19,520@-1910*/0/1+2, Default 420@-1610*/0/1, 380/0/3,0/4/0

SPA9000 Field Reference

Voice tab

B

Second Dial Tone	Alternative to the Dial Tone when the user dials a three-way
	call.
	Default: 420@-19,520@-19;10(*/0/1+2)
Outside Dial Tone	Alternative to the Dial Tone. It prompts the user to enter an
	external phone number, as opposed to an internal extension.
	It is triggered by a, (comma) character encountered in the dial
	plan.
	Default: 420@-16;10(*/0/1)
Prompt Tone	Prompts the user to enter a call forwarding phone number.
	Default: 520@-19,620@-19;10(*/0/1+2)
Busy Tone	Played when a 486 RSC is received for an outbound call.
	Default: 480@-19,620@-19;10(.5/.5/1+2)
Reorder Tone	Played when an outbound call has failed or after the far end
	hangs up during an established call. Reorder Tone is played
	automatically when <Dial Tone> or any of its alternatives
	times out.
	Default: 480@-19,620@-19;10(.25/.25/1+2)
Off Hook Warning Tone	Played when the caller has not properly placed the handset
	on the cradle. Off Hook Warning Tone is played when
	Reorder Tone times out.
	Default: 480@10,620@0;10(.125/.125/1+2)
Ring Back Tone	Played during an outbound call when the far end is ringing.
	Default: 440@-19,480@-19;*(2/4/1+2)
Confirm Tone	Brief tone to notify the user that the last input value has been
	accepted.
	Default: 600@-16; 1(.25/.25/1)
SIT1 Tone	Alternative to the Reorder Tone played when an error occurs
	as a caller makes an outbound call. The RSC to trigger this
	tone is configurable on the SIP screen.
	Default: 985@-16,1428@-16,1777@-16;20(.380/0/1,.380/
	0/2,.380/0/3,0/4/0)
SIT2 Tone	Alternative to the Reorder Tone played when an error occurs
	as a caller makes an outbound call. The response status code
	(RSC) to trigger this tone is configurable on the SIP screen.
	Default: 914@-16,1371@-16,1777@-16;20(.274/0/1,.274/
	0/2,.380/0/3,0/4/0)

SPA9000 Voice System Administration Guide 225