Cisco Systems SPA9000 manual System Status section, FXS 1/2 Status section

SPA9000 Field Reference

Voice tab

B

Client Certificate	The status of the client certificate, which authenticates the
	SPA9000 for use in the ITSP network
Customization	For an remote configuration (RC) unit, this field indicates
	whether the unit has been customized or not. Pending
	indicates a new RC unit that is ready for provisioning. If the
	unit has already retrieved its customized profile, this field
	displays the name of the company that provisioned the unit.
Licenses	When populated with the value K0, indicates that the
	SPA9000 is licensed for up to 16 users; if this field is blank,
	install firmware version 5.2.5 or higher.

Voice tab > Info page >

System Status section

Current Time	The current date and time of the system; for example, 10/3/
	2003 16:43:00
Elapsed Time	The total time elapsed since the last reboot of the system; for
	example, 25 days and 18:12:36

Voice tab > Info page >

FXS 1/2 Status section

Hook State	The readiness of the device that is connected to the
	corresponding Phone port on the SPA9000
	• On: Ready for use
	• Off: In use
Message Waiting	Indicates whether the station assigned to the FXS port has
	new voicemail waiting: Yes or No
Call Back Active	Indicates whether a call back request is in progress: Yes or
	No
Last Called Number	Last number called
Last Caller Number	Number of the last caller if available from caller ID, example
	4085551212
Call 1/2 State	Status of the call:, Ringing, Idle, or Connected
Call 1/2 Tone	Type of tone used by the call, for example Ring Back 2 for
	inbound call or None for outbound call
Call 1/2 Encoder	Codec used for encoding

SPA9000 Voice System Administration Guide 198