Cisco Systems SPA9000 manual Using the Resync URL, Using the Reboot URL

Advanced Topics in SPA9000 Administration

Remote Provisioning Features

A

spa.bin is assumed, as in the following example: http://192.168.2.217/

admin/upgrade?tftp://192.168.2.251/spa.bin

Using the Resync URL

The SPA9000 can be configured to automatically resynchronize its internal configuration state to a remote profile periodically and on power up. The automatic resyncs are controlled by configuring the desired profile URL into the device.

NOTE The SPA resynchronizes only when it is idle.

SYNTAX:

http://spa-ip-addr/admin/resync?[[protocol://][server- name[:port]]/profile-pathname]

EXAMPLE: http://192.168.2.217/admin/resync?tftp:// 192.168.2.251/spaconf.cfg

•If no parameter follows /resync?, the Profile Rule setting from the Provisioning page is used.

•If no protocol is specified, TFTP is assumed. If no server-name is specified, the host that requests the URL is used as server-name.

•If no port is specified, the default port is used (69 for TFTP, 80 for HTTP, and 443 for HTTPS).

•The profile-path is the path to the new profile with which to resync.

Using the Reboot URL

You can use the Reboot URL to reboot the SPA9000.

NOTE The SPA9000 reboots only when it is idle.

SYNTAX: http://spa-ip-addr/admin/reboot

EXAMPLE: http://192.168.2.217/admin/reboot

SPA9000 Voice System Administration Guide 190