Cisco Systems SPA9000 manual Distinctive Ring Patterns section

SPA9000 Field Reference

Voice tab

B

SIT3 Tone	Alternative to the Reorder Tone played when an error occurs
	as a caller makes an outbound call. The RSC to trigger this
	tone is configurable on the SIP screen.
	Default: 914@-16,1371@-16,1777@-16;20(.380/0/1,.380/
	0/2,.380/0/3,0/4/0)
SIT4 Tone	This an alternative to the Reorder Tone played when an error
	occurs as a caller makes an outbound call. The RSC to trigger
	this tone is configurable on the SIP screen.
	Default: 985@-16,1371@-16,1777@-16;20(.380/0/1,.274/
	0/2,.380/0/3,0/4/0)
MWI Dial Tone	Played instead of the Dial Tone when there are unheard
	messages in the caller’s mailbox.
	Default: 350@-19,440@-19;2(.1/.1/1+2);10(*/0/1+2)
Cfwd Dial Tone	Played when all calls are forwarded.
	Default: 350@-19,440@-19;2(.2/.2/1+2);10(*/0/1+2)
Holding Tone	Informs the local caller that the far end has placed the call on
	hold.
	Default: 600@-19*(.1/.1/1,.1/.1/1,.1/9.5/1)
Conference Tone	Played to all parties when a three-way conference call is in
	progress.
	Default: 350@-19;20(.1/.1/1,.1/9.7/1)
Secure Call Indication	Played when a call has been successfully switched to secure
Tone	mode. It should be played only for a short while (less than 30
	seconds) and at a reduced level (less than -19 dBm) so it
	does not interfere with the conversation.
	Default: 397@-19,507@-19;15(0/2/0,.2/.1/1,.1/2.1/2)
Feature Invocation Tone	Played when a feature is implemented.
	Default: 350@-16;*(.1/.1/1)

Voice tab > Regional page

Distinctive Ring Patterns section

Ring1 Cadence	Cadence script for distinctive ring 1.
	Default: 60(2/4)
Ring2 Cadence	Cadence script for distinctive ring 2.
	Default: 60(.8/.4,.8/4)

SPA9000 Voice System Administration Guide 226