Cisco Systems SPA9000 manual Click Voice tab System

Basic Administration of the SPA9000	2
Configuring Basic Settings

Partners can download the Syslog Server for SPA Devices by going to Cisco Partner Central, Voice & Conferencing page, Technical Resources section. Use the following URL:

/www.cisco.com/web/partners/sell/smb/products/ voice_and_conferencing.html#~vc_technical_resources

NOTE As a best practice, enable logging only when needed, and disable logging when you finish the investigation. Logging information can impact system performance.

STEP 1 Connect to the SPA9000 administration web server, and choose Admin access with Advanced settings. (See “Connecting to the SPA9000 Administration Web Server,” on page 27).

STEP 2 Click Voice tab > System.

STEP 3 In the Miscellaneous Settings section, enter the following settings:

•Syslog Server: Enter the server IP address and port to collect basic information about system activity (no SIP messages).

•Debug Server: Enter the server IP address and port to collect information about SIP messages.

NOTE SIP logging is not enabled until you complete this procedure by enabling system logging on the line interface.

•Debug Level: Choose 3 to enable debugging.

STEP 4 Click Voice tab > Line N, where N represents the line interface number of the line that you are investigating.

STEP 5 Scroll down to the SIP Settings section, and then choose a SIP Debug Option, based on the level of SIP information that you want to collect.

Typically, your ITSP support personnel will tell you what type of information they need in the logs. The drop-down list includes three categories of options: none, 1-line, and full.

•none: Disables SIP logging

SPA9000 Voice System Administration Guide 37