Cisco Systems SPA9000 manual Vertical Service Activation Codes section

SPA9000 Field Reference

Voice tab

B

CPC Duration

Duration in seconds for which the tip-to-ring voltage is removed after the caller hangs up. After that, tip-to-ring voltage is restored and dial tone applies if the attached equipment is still off-hook. CPC is disabled if this value is set to 0. Range: 0 to 1.000 second. Resolution is 0.001 second.

Default: 0 (CPC disabled)

Voice tab > Regional page

Vertical Service Activation Codes section

NOTE Vertical Service Activation Codes are automatically appended to the dial-plan. There is no need to include them in dial-plan, although no harm is done if they are included.

Call Return Code	This code calls the last caller.
	Default: *69
Call Redial Code	Redials the last number called.
	Default: *07
Blind Transfer Code	Begins a blind transfer of the current call to the extension
	specified after the activation code.
	Default: *98
Call Back Act Code	Starts a callback when the last outbound call is not busy.
	Default: *66
Call Back Deact Code	Cancels a callback.
	Default: *86
Call Back Busy Act Code	Starts a callback when the last outbound call is busy.
	Default: *05
Cfwd All Act Code	Forwards all calls to the extension specified after the
	activation code.
	Default: *72
Cfwd All Deact Code	Cancels call forwarding of all calls.
	Default: *73
Cfwd Busy Act Code	Forwards busy calls to the extension specified after the
	activation code.
	Default: *90

SPA9000 Voice System Administration Guide 231