Cisco Systems SPA9000 Lan Setup page and Application, QOS Settings section, Vlan Settings section

SPA9000 Field Reference

Router Tab

B

Router tab > Wan Setup page >

QOS Settings section

QoS Policy	The queueing discipline, set to none or token bucket filter
	(TBF). TBF limits the rate of transmission to not attempt to
	exceed the Maximum Uplink Speed.

QOS QDisc	Allow QoS Queuing. Options are None or TBF (token
	bucket filter). Information can be found at about TBF at:
	lartc.org/howto/lartc.qdisc.classless.html
Maximum Uplink Speed	Define this value to allow the token bucket filter queueing
	discipline to manage traffic flow to ensure high quality voice
	audio.

Router tab > Wan Setup page >

VLAN Settings section

Enable VLAN	Enable voice data to be tagged with the defined VLAN ID.
	NOTE Choose yes If your SPA9000 is connected to a switch
	that uses VLAN tagging.
VLAN ID	The VLAN tag for the VLAN to which the SPA9000 is
	assigned

Router tab >

Lan Setup page and Application page

NOTE Linksys Engineering and Quality Assurance strongly advise against using the SPA9000 as a router. For this reason, the Lan Setup and Application tabs should not be modified from the default, unused state. The SPA9000 must only be connected to a switch via the SPA9000 INTERNET RJ45 connector. Do not connect any cable to the SPA9000 ETHERNET port, or you may experience degraded audio performance.

SPA9000 Voice System Administration Guide 196