Cisco Systems SPA9000 manual Entering a Call Routing Rule, Click Voice tab SIP

Configuring Phone Lines and Calling Routing Behavior	4
Managing the Line Selection for Outbound Calls

•Wildcard characters EXAMPLE: (<:L1>51*,577?)

In this example, Line 1 can be used when either of the following number patterns is dialed:

•The user dials a number that starts with 51, followed by any other characters.

•The user dials any four-digit number starting with 577.

Entering a Call Routing Rule

Use the following procedure to enter a call routing rule.

STEP 1 Start Internet Explorer, and then enter the IP address of the SPA9000. Click Admin Login and then click Advanced.

STEP 2 Click Voice tab > SIP.

STEP 3 Scroll down to the PBX Parameters section.

STEP 4 In the Call Routing Rule field, enter the rule that you want to apply

STEP 5 Click Submit All Changes.

STEP 6 To verify your progress, place a call to a phone that has caller ID, and confirm that the expected number appears.

SPA9000 Voice System Administration Guide 81