Cisco Systems SPA9000 manual Configuring Call Capacity for a Line Interface

Configuring Phone Lines and Calling Routing Behavior	4
Configuring Line Interfaces on the SPA9000

SPA9000 Voice > Line

STEP 8 Click Submit All Changes. The SPA9000 device reboots.

NOTE You need to configure the SPA400 with the corresponding settings. See “Configuring Local Voice Mail Service on a SPA400,” on page113.

Configuring Call Capacity for a Line Interface

Each line interface has a limited number of simultaneous calls that are allowed, based on the Call Capacity parameter. When the maximum call capacity is reached, the SPA9000 does not allocate any more calls to that line interface.

This section includes the following topics:

•

•

“Bandwidth Requirements and Call Capacity,” on page 64

“Setting the Call Capacity Parameter,” on page 65

SPA9000 Voice System Administration Guide 63