Cisco Systems SPA9000 Call Progress Tones by Country Australia Dial Tone, Outside Dial Tone

Localization	8
Configuring the SPA9000 and SPA9xx Call Progress Tones

STEP 2 Localize the tones for the phones:

a.Click the PBX Status link.

b.Find the phone that you want to configure, and then click the hyperlink in the IP Address column.

c.Click Regional.

d.In the Call Progress Tones section, enter the values from Table 2, ‘SPA9000 Call Progress Tones by Country,” on page155.

e.Click Submit All Changes.

f.Repeat this step as needed for each phone.

Table 2 SPA9000 Call Progress Tones by Country

Australia

Dial Tone	400@-19,425@-19;10(*/0/1+2)
Outside Dial Tone	420@-16;10(*/0/1)
Prompt Tone	520@-19,620@-19;10(*/0/1+ 2)
Reorder Tone	425@-19;*(2.5/.5)
Off Hook Warning Tone	480@-10,620@0;10(.125/.125/1+2)
Ring Back Tone	400@-19,425@-19;*(.4/.2/1+2,.4/2/1+2)
Busy Tone	425@-16;10(.375/.375/1)
Call Waiting Tone	400@-20;30(0.1/2/1)
Confirm Tone	600@-16;1(.25/.25/1)
Denmark

Dial Tone

Outside Dial Tone

Prompt Tone

Reorder Tone

Off Hook Warning Tone

425@-10;*(*/0/1)

425@-16;10(*/0/1)

425@-19,620@-19;*(*/0/1+2)

425@-10;*(0.25/0.25/1)

425@-10;*(.2/.2/1,.2/.6/1)

SPA9000 Voice System Administration Guide 155