Cisco Systems manual Local Time Configuration, SPA9000 Daylight Saving Time Rules

Localization	8
Local Time Configuration

Local Time Configuration

You will need to localize the date, time, and daylight saving time rule. See “Setting the Date and Time,” on page 30 and “Configuring Daylight Saving Time,” on page 31. Use the following table to find the correct Daylight Saving Time Rules for EMEA and Australia.

Table 1 SPA9000 Daylight Saving Time Rules

Country	Daylight Saving Time Rule	Time Zone
Australia (ACST)	start=4/1/7/3;end=10/1/7/2;save=-1	GMT+10:30
Australia (AEST)	start=4/1/7/3;end=10/1/7/2;save=-1	GMT+11
Australia (AWST)	start=3/-1/7/3;end=10/-1/7/2;save=¬1	GMT+09:00
France	start=3/-1/7/2;end=10/-1/7/2;save=1	GMT+1
Germany	start=3/-1/7/2;end=10/-1/7/2;save=1	GMT+1
Spain	start=3/-1/7/2;end=10/-1/7/2;save=1	GMT+1
UK/Ireland	start=3/-1/7/2;end=10/-1/7/2;save=1	GMT

Configuring the SPA9000 and SPA9xx Call Progress Tones

Call progress tones, such as dial tone and reorder, indicate the call progress to the users. You can configure your SPA9000 and your SPA9xx phones to use the appropriate call progress tones for your region.

STEP 1 Localize the tones for the SPA9000:

a.Start Internet Explorer, and then enter the IP address of the SPA9000. Click Admin Login and then click Advanced.

b.Click Voice tab > Regional.

c.In the Call Progress Tones section, enter the values from Table 3-1 into the corresponding fields.

d.Click Submit All Changes.

SPA9000 Voice System Administration Guide 154