Cisco Systems SPA9000 manual Static IP Settings section, PPPoE Settings section, Default

SPA9000 Field Reference

Router Tab

B

Router tab > Wan Setup page >

Static IP Settings section

Static IP	Static IP address of SPA9000, which takes effect if DHCP is
	disabled.
	Default: 0.0.0.0
NetMask	The NetMask used by SPA9000 when DHCP is disabled.
	Default: 255.255.255.0
Gateway	The default gateway used by SPA9000 when DHCP is
	disabled.
	Default: 0.0.0.0

Router tab > Wan Setup page >

PPPoE Settings section

PPPoE Login Name	The account name assigned by the ISP for connecting on a
	Point-to-Point Protocol over Ethernet (PPPoE) link.
PPPoE Login Password	The password assigned by the ISP for connecting on a
	Point-to-Point Protocol over Ethernet (PPPoE) link.
PPPoE Service Name	The service name assigned by the ISP for connecting on a
	Point-to-Point Protocol over Ethernet (PPPoE) link.

Router tab > Wan Setup page >

Optional Settings section

HostName	The host name of the SPA9000
Domain	The network domain of the SPA9000.
Primary DNS	The DNS server that is used by the SPA9000
	NOTE When DHCP is enabled, you can enter the IP address
	of a DNS server in addition to DHCP-supplied DNS servers.
	When DHCP is disabled, enter the primary DNS server.
	Default: 0.0.0.0

SPA9000 Voice System Administration Guide 194