Cisco Systems SPA9000 manual Localizing the SPA400 Caller ID Method, Click Administration Reboot

Localization	8
Localizing the SPA400 Caller ID Method

STEP 4 Click Save Settings.

STEP 5 On the menu, click Setup > Voice.

STEP 6 Scroll down to the Tear Down FXO Port field, and enter 0. Refer to the following illustration.

SPA400 Setup tab > Voice page: Line Settings section

STEP 7 Click Save Settings.

STEP 8 To restart the SPA400, complete the following steps:

a.Click Administration > Reboot.

b.Click the Restart System button.

c.When the confirmation message appears, click OK. The SPA400 reboots.

d.When the Reboot OK. Go to Setup page? message appears, click OK.

Localizing the SPA400 Caller ID Method

You need to identify the caller ID method to use in your country.

STEP 1 Click Setup tab > Voice.

STEP 2 Scroll down to the Line Settings section.

STEP 3 From the Caller Id and CP Tone Method drop-down list, choose your region.

SPA400 Setup tab > Voice page

SPA9000 Voice System Administration Guide 163