Cisco Systems SPA9000 manual To restart the SPA400, complete the following tasks

Localization	8
Localizing the SPA400 Caller ID Method

NOTE In the United Kingdom, choose UK BT or UK CCA. In the rest of Europe, choose European (FSK).

STEP 4 Click Save Settings.

STEP 5 To restart the SPA400, complete the following tasks:

a.Click Administration > Reboot.

b.Click the Restart button.

c.When the confirmation message appears, click OK. The SPA400 reboots.

d.When the Reboot OK message appears, click OK.

STEP 6 To verify your progress, make a call from outside to any of the PSTN lines connected to the SPA400 (make sure that CID is enable in your PSTN line). In the ringing SPA phone display you should now be able to see the number from the calling number.

SPA9000 Voice System Administration Guide 164