Cisco Systems SPA9000 manual Provisioning, Regional, Call Progress Tones section

SPA9000 Field Reference

Voice tab

B

Voice tab>

Provisioning page

This page is available for service provider use only. Information is available in the Linksys Provisioning Guide, which is available only to service providers who are registered with Linksys.

Voice tab >

Regional page

You can use the Regional page to customize the tones and ring patterns, vertical service activation codes (star codes) and announcement codes, codec selection codes, and other regional settings such as time zone. This page includes the following sections:

•“Call Progress Tones section,” on page 224

•“Distinctive Ring Patterns section,” on page 226

•“Distinctive Call Waiting Tone Patterns section,” on page 227

•“Distinctive Ring/CWT Pattern Names section,” on page 228

•“Ring and Call Waiting Tone Spec section,” on page 229

•“Control Timer Values (sec) section,” on page 229

•“Vertical Service Activation Codes section,” on page 231

•“Vertical Service Announcement Codes section,” on page 236

•“Outbound Call Codec Selection Codes section,” on page 236

•“Miscellaneous section,” on page 237

Voice tab > Regional page

Call Progress Tones section

Dial Tone

Prompts the user to enter a phone number. Reorder Tone is played automatically when <Dial Tone> or any of its alternatives times out.

Default: 350@-19,440@-19;10(*/0/1+2)

SPA9000 Voice System Administration Guide 224