Cisco Systems SPA9000 manual Ivr

Basic Administration of the SPA9000	2
Using the Interactive Voice Response Unit

IVR Action	IVR	Parameters	Notes
	Menu
	Choice
Set Static IP	111	Enter IP address	DHCP must be disabled
Address		using numbers on	first, or this value is
		the telephone key	considered an “Invalid
		pad. Use the * (star)	Option.” Hang up the phone
		key when entering a	after setting the IP address.
		decimal point.	The SPA9000 reboots and
			the new address takes
			effect. Do not attempt to
			use IVR option 110
			immediately after changing
			the IP address. The old IP
			address is reported until
			the SPA9000 reboots.
			Requires password
Check Network	120	None	IVR announces the current
Mask			network mask of SPA.
Set Network	121	Enter value using	DHCP must be disabled
Mask		numbers on the	first, or this value is
		telephone key pad.	considered an “Invalid
		Use the * (star) key	Option.”
		when entering a	Requires password
		decimal point.
Check Static	130	None	IVR announces the current
Gateway IP			gateway IP address of SPA.
Address
Set Static	131	Enter IP address	DHCP must be “Disable,”
Gateway IP		using numbers on	otherwise you hear, “Invalid
Address		the telephone key	Option,” if you try to set this
		pad. Use the * (star)	value.
		key when entering a	Requires password
		decimal point.
Check MAC	140	None	IVR announces the MAC
Address			address of SPA in hex
			string format.

SPA9000 Voice System Administration Guide 42