Cisco Systems manual SPA9000 Voice System Administration Guide 254

SPA9000 Field Reference

Voice tab

B

SIP Debug Option	SIP messages are received at or sent from the proxy listen
	port. This feature controls which SIP messages to log.
	Choices are as follows:
	none—No logging.
	1-line—Logs the start-line only for all messages.
	1-line excl. OPT—Logs the start-line only for all messages
	except OPTIONS requests/responses.
	1-line excl. NTFY—Logs the start-line only for all messages
	except NOTIFY requests/responses.
	1-line excl. REG—Logs the start-line only for all messages
	except REGISTER requests/responses.
	1-line excl. OPTNTFYREG—Logs the start-line only for all
	messages except OPTIONS, NOTIFY, and REGISTER
	requests/responses.
	full—Logs all SIP messages in verbose mode.
	full excl. OPT—Logs all SIP messages in full text except
	OPTIONS requests/responses.
	full excl. NTFY—Logs all SIP messages in full text except
	NOTIFY requests/responses.
	full excl. REG—Logs all SIP messages in full text except
	REGISTER requests/responses.
	full excl. OPTNTFYREG—Logs all SIP messages in full text
	except for OPTIONS, NOTIFY, and REGISTER requests/
	responses.
	Default: None
Restrict Source IP	If line interfaces use the same SIP Port value and the Restrict
	Source IP feature is enabled, the proxy IP address for Lines 1
	and 2 is treated as an acceptable IP address for both lines. To
	enable the Restrict Source IP feature, select yes. Otherwise,
	select no. A source IP address is untrusted if it does not
	match any of the IP addresses resolved from the configured
	<Proxy> (or <Outbound Proxy> if <Use Outbound Proxy> is
	yes).
	Default: no
Referor Bye Delay	Controls when the SPA9000 sends BYE to terminate stale call
	legs upon completion of call transfers. Multiple delay settings
	(Referor, Refer Target, Referee, and Refer-To Target) are
	configured on this screen. For the Referor Bye Delay, enter
	the appropriate period of time in seconds.
	Default: 4

SPA9000 Voice System Administration Guide 254