Cisco Systems SPA9000 manual

Models: SPA9000

1 286
Download 286 pages 40.22 Kb
Page 64
Image 64
Mailbox Subscribe Expires: 30
This setting ensures that the SPA9000 and the SPA400 voice mail server are resynchronized every 30 seconds, and prevents problems when you make changes in the settings.
SPA9000 Voice System Administration Guide
STEP 7
If you are using this SPA400 for voice mail service, continue to
Step 7.
STEP 6
Set CFWD Bridge Mode to all.
Set XFER Bridge Mode to all.
Set VMSP Bridge to all (required if this line is being used for SPA400 voice mail service).
STEP 5
Mailbox Subscribe URL: 8888@<IP address of SPA400>:5090
The SPA9000 uses this address to subscribe to voice mail service on the voice mail server.
Mailbox Manage URL: 800@<IP address of SPA400>:5090
The SPA9000 uses this address to access voice mail on the voice mail server.
Mailbox Deposit URL: 900@<IP address of SPA400>:5090
The SPA9000 uses this address to deposit voice mail on the voice mail server.
If you are using this SPA400 for PSTN access only, click Submit All Changes to finish this procedure. You will need to configure the SPA400. For more information, see “Configuring a SPA400 to Interoperate with the SPA9000,” on page108 and “Configuring a SPA400 for PSTN Access,” on page111.
Enter the following settings for the SPA400 voice mail service:
Contact List: The default value is aa, for the Auto Attendant. As a general practice, you should leave the default value until after you confirm that the line is registered in the Voice > Info page, Line Status section, Registration State field. Then you can configure the contact list. For more information, see “Managing Inbound Calls with the Contact List,” on page 85.
Proceed as needed:
SIP Port: You can keep the default value. Each line must have a unique SIP port (5060 for Line 1, 5061 for Line 2, 5062 for Line 3, 5064 for Line 4).
Also in the Proxy and Registration section, enter the following settings to ensure that calls can be transferred and forwarded to the voice mail server:
Configuring Phone Lines and Calling Routing Behavior Configuring Line Interfaces on the SPA9000

4

62

Page 64
Image 64
Cisco Systems SPA9000 manual