SPA9000 Field Reference

Voice tab

B

Feature Dial Services

These codes tell the Linksys ATA what to do when the user is

Codes

listening to the first or second dial tone.

 

One or more *code can be configured into this parameter,

 

such as *72, or *72*74*67*82, etc. Max total length is 79

 

chars. This parameter applies when the user has a dial tone

 

(first or second dial tone). Enter *code (and the following

 

target number according to current dial plan) entered at the

 

dial tone triggers the Linksys ATA to call the target number

 

prepended by the *code. For example, after user dials *72,

 

the Linksys ATA plays a prompt tone awaiting the user to

 

enter a valid target number. When a complete number is

 

entered, the Linksys ATA sends a INVITE to

 

*72<target_number> as in a normal call. This feature allows

 

the proxy to process features like call forward (*72) or BLock

 

Caller ID (*67).

 

The *codes should not conflict with any of the other vertical

 

service codes internally processed by the Linksys ATA. You

 

can empty the corresponding *code that you do not want to

 

Linksys ATA to process.

 

You can add a parameter to each *code in Features Dial

 

Services Codes to indicate what tone to play after the *code

 

is entered, such as *72‘c‘*67‘p‘. Below are a list of allowed

 

tone parameters (note the use of back quotes surrounding

 

the parameter w/o spaces)

 

• ‘c‘ = <Cfwd Dial Tone>

 

• ‘d‘ = <Dial Tone>

 

• ‘m‘ = <MWI Dial Tone>

 

• ‘o‘ = <Outside Dial Tone>

 

• ‘p‘ = <Prompt Dial Tone>

 

• ‘s‘ = <Second Dial Tone>

 

• ‘x‘ = No tones are place, x is any digit not used above

 

If no tone parameter is specified, the Linksys ATA plays

 

Prompt tone by default.

 

If the *code is not to be followed by a phone number, such as

 

*73 to cancel call forwarding, do not include it in this

 

parameter. In that case, simple add that *code in the dial plan

 

and the Linksys ATA send INVITE *73@..... as usual when user

 

dials *73.

 

 

Media Loopback Code

Default: *03

 

 

SPA9000 Voice System Administration Guide

235

Page 237
Image 237
Cisco Systems manual SPA9000 Voice System Administration Guide 235