Cisco Systems SPA9000 manual Click Save Settings Click Setup tab Basic Setup

Administering the SPA400 and Voice Mail Service	5
Enabling Debugging on the SPA400

SPA400 Event Logs

STEP 4 Click Save Settings.

NOTE As a best practice, enable logging only when needed, and disable logging when you finish the investigation. Logging information can impact system performance.

STEP 5 Click Setup tab > Basic Setup.

STEP 6 In the Syslog Settings section, enter the IP address of the Syslog Server, which normally is a PC on the same network as the SPA400.

SPA9000 Voice System Administration Guide 123