Cisco Systems manual SPA9000 Voice System Administration Guide 259

SPA9000 Field Reference

Voice tab

B

Mailbox Manage URL	This parameter allows $USER, $PROXY, and $MBID macros,
	such as $USER@$PROXY, or $MBID@$PROXY.
	Default: blank
VMSP Bridge	Applies only if this line interface offers voice mail services. It
	specifies whether the SPA9000 should bridge the call from
	an external caller on the same or a different line interface. The
	choices are:
	None—Do not bridge external calls from any line interfaces
	All—Bridge external calls from any line interfaces except
	from the same line
	All+Self—Bridge external calls from any line interfaces
	including the same line
	NOTE:
	If the external call is also on this line interface, the SPA9000
	does not attempt to bridge the call even if the value is All.
	If <PBX Network Interface> is WAN, <Force Media Proxy>
	must be yes for VMSP Bridging to function properly.
	Default: None
CFWD Bridge Mode	Instructs the SPA9000 how to handle call forwarding of an
	external caller to another external number by a client station.
	The normal way of performing this operation is for the
	SPA9000 to send a (blind) SIP REFER to the calling device to
	let it contact the target number directly. It then drops out of
	the call completely. This requires the calling device to
	understand the SIP signaling involved and the operation
	permitted by the underlying service provider. The SPA400,
	for instance, cannot handle this operation.
	With bridging, the SPA9000 maintains two separate call legs
	throughout the call: one with the caller and one with the call
	forward target. The two call peers connect only with the
	SPA9000, while the SPA9000 acts as a proxy for the RTP
	packets exchanged between the two parties.
	This parameter has two possible values:
	None—Do not bridge forwarded calls (use the normal REFER
	method)
	All—Bridge all forwarded calls
	Default: None

SPA9000 Voice System Administration Guide 259