as you will need it to use your networked OneTouch drive after formatting.
16. Click Administration.
A window will open, asking you to enter your user name and password.
17.Enter admin for both user name and password and click OK. The LAN page will appear.
18.Click Advanced.
The Groups page will appear.
19.Click Disk.
The Disk page will appear.
20. Click Format Disk 1.
Note: If your drive is connected to the Disk 2 port on the Network Storage Link, click Format Disk 2.
The formatting process may take 15 to 30 minutes, depending on the size of your OneTouch Drive.
Once it is finished, the message: “Formatted” will appear.
21.Close your web browser and click No at the bottom of the Linksys Setup Screen.
Note: For more information about the Linksys Web Utility, see Chapter 6: “Configuring the Storage Link,” in the Linksys User Guide.
Using Your Networked OneTouch Drive
To use your networked OneTouch Drive, follow these steps:
1. On the desktop,
Figure 5. Mapping a Network Drive
4
