Cisco Systems SPA9000 manual 7end=10/-1/7save=1

SPA9000 Field Reference

Voice tab

B

Daylight Saving Time	The <save-time> value is the number of hours, minutes, and/
Rule (continued)	or seconds to add to the current time during daylight saving
	time. The <save-time> value can be preceded by a negative
	(-) sign if subtraction is desired instead of addition. The
	<save-time> value is in this format: [/[+-]HH:[mm[:ss]]]
	The <month> value equals any value in the range 1-12
	(January-December).
	The <day> value equals [+-] any value in the range 1-31.
	If <day> is 1, it means the <weekday> on or before the end of
	the month (in other words the last occurrence of < weekday>
	in that month).
	The <weekday> value equals any value in the range 1-7
	(Monday-Sunday). It can also equal 0. If the <weekday> value
	is 0, this means that the date to start or end daylight saving is
	exactly the date given. In that case, the <day> value must not
	be negative. If the <weekday> value is not 0 and the <day>
	value is positive, then daylight saving starts or ends on the
	<weekday> value on or after the date given. If the
	<weekday> value is not 0 and the <day> value is negative,
	then daylight saving starts or ends on the <weekday> value
	on or before the date given.
	The abbreviation HH stands for hours (0-23).
	The abbreviation mm stands for minutes (0-59).
	The abbreviation ss stands for seconds (0-59).
	The default Daylight Saving Time Rule is start=4/1/
	7;end=10/-1/7;save=1.
FXS Port Input Gain	Input gain in dB, up to three decimal places. The range is
	6.000 to -12.000.
	Default: -3.
FXS Port Output Gain	Output gain in dB, up to three decimal places. The range is
	6.000 to -12.000. The Call Progress Tones and DTMF
	playback level are not affected by the <FXS Port Output
	Gain>.
	Default: -3
DTMF Playback Level	Local DTMF playback level in dBm, up to one decimal place.
	Default: -16.0
DTMF Playback Length	Local DTMF playback duration in milliseconds.
	Default: .1

SPA9000 Voice System Administration Guide 239