Cisco Systems SPA9000 manual Mbs = mbidnew/old

SPA9000 Field Reference

Voice tab

B

DNS SRV Auto Prefix	If enabled, the SPA9000 will automatically prepend the Proxy
	or Outbound Proxy name with _sip._udp when performing a
	DNS SRV lookup on that name.
	Default: no
Proxy Fallback Intvl	This parameter sets the delay (sec) after which the SPA9000
	will retry from the highest priority proxy (or outbound proxy)
	servers after it has failed over to a lower priority server. This
	parameter is useful only if the primary and backup proxy
	server list is provided to the SPA9000 via DNS SRV record
	lookup on the server name. (Using multiple DNS A record per
	server name does not allow the notion of priority and so all
	hosts are considered at the same priority and the SPA9000
	will not attempt to fall back after a fail over).
	Default: 3600
Proxy Redundancy	SPA9000 will make an internal list of proxies returned in DNS
Method	SRV records. In normal mode, this list will contain proxies
	ranked by weight and priority.
	If based on SRV, the port is configured, the SPA9000 does
	normal first and also inspects the port number based on 1st
	proxy’s port in the list.
	Default: Normal
Mailbox Status	The status of the connection to the voice mail server
	Mailbox status for all the mailboxes associated with this line
	interface. The status is automatically updated when the
	SPA9000 receives voicemail status notification from the ITSP.
	Format: [mbs[,mbs[,mbs[,…]]]] where:
	mbs = mbid:new/old
	mbid = mailbox ID, such as 12345
	new = number of new messages in mailbox: 0,1,2,…
	old = number of old messages in mailbox: 0, 1, 2, …
Mailbox Subscribe URL	This parameter allows $USER and $PROXY macros, such as
	$USER@$PROXY
Mailbox Deposit URL	This parameter allows $USER, $PROXY, and $MBID macros,
	such as $USER@$PROXY, or $MBID@$PROXY.
	Default: blank
Mailbox Subscribe	Identifies when the mailbox subscription expires.
Expires	Recommended: 30

SPA9000 Voice System Administration Guide 258