Cisco Systems SPA9000 manual Entering the Daylight Saving Time Rule, HHmmss

Basic Administration of the SPA9000	2
Configuring Basic Settings

Enter these values in the following format: <month>/<day>/<weekday>[/

HH[:mm[:ss]]]

•<month>: 1-12 (January-December)

•<day>: 1-31

•<weekday>: Optional. If included, this value causes the rule to take effect on a particular day of the week before or after the specified date. Use the values 1-7 to represent the days Monday (1) through Sunday (7). Omit this parameter or enter 0 to cause the rule to take effect exactly on the specified date. If <weekday> is not 0 and the <day> value is positive, then daylight saving time starts or ends on <weekday> on or after the specified date. If <weekday> is not 0 and the <day> value is negative, then daylight saving time starts or ends on <weekday> on or before the specified date.

•HH:mm:ss: Optional. The time of day when the setting takes effect, in hours (0-23), minutes (0-59), and seconds (0-59)

•<save-time>:The number of hours (and optionally minutes and/or seconds) to add to the NTP server time during daylight saving time. Enter a negative (-) sign before <save-time> if subtraction is desired instead of addition.

Entering the Daylight Saving Time Rule

Follow this procedure to configure daylight saving time on your SPA9000 Voice

System.

STEP 1 Connect to the SPA9000 administration web server, and choose Admin access with Advanced settings. (See “Connecting to the SPA9000 Administration Web Server,” on page 27).

STEP 2 Click Voice tab > Regional.

STEP 3 Scroll down to the Miscellaneous section.

STEP 4 Enter the rule in the Daylight Saving Time Rule field.

STEP 5 Click Submit All Changes.

SPA9000 Voice System Administration Guide 32