Cisco Systems SPA9000 manual Entering a Password through the IVR

Basic Administration of the SPA9000	2
Using the Interactive Voice Response Unit

NOTE The items marked with “Requires Password” only require a password if the Administrator password is set.

Entering a Password through the IVR

To input the password using the phone keypad, the following translation conventions apply:

•To input: A, B, C, a, b, c—press “2’

•To input: D, E, F, d, e, f—press “3’

•To input: G, H, I, g, h, i—press “4’

•To input: J, K, L, j, k, l— press “5’

•To input: M, N, O, m, n, o—press “6’

•To input: P, Q, R, S, p, q, r, s—press “7’

•To input: T, U, V, t, u, v—press “8’

•To input: W, X, Y, Z, w, x, y, z—press “9’

•To input all other characters in the Administrator account password, press “0’

For example, to input password test#@1234 by phone keypad, you need to press the following sequence of digits: 8378001234. This translation convention only applies to the password input.

STEP 1 After entering a value, press the # (pound) key to indicate end of input.

•To save value, press 1.

•To review the value, press 2.

•To re-enter the value, press 3.

•To cancel the value entry and return to the main configuration menu, press *’ (star).

SPA9000 Voice System Administration Guide 45