| Syslog Level | Select the ATA to report the log level. Default is NONE. The level is one of DEBUG, |
|
| INFO, WARNING or ERROR. Syslog messages are sent based on the following |
|
| events: |
|
| • product model/version on boot up (INFO level) |
|
| • NAT related info (INFO level) |
|
| • sent or received SIP message (DEBUG level) |
|
| • SIP message summary (INFO level) |
|
| • inbound and outbound calls (INFO level) |
|
| • registration status change (INFO level) |
|
| • negotiated codec (INFO level) |
|
| • Ethernet link up (INFO level) |
|
| • SLIC chip exception (WARNING and ERROR levels) |
|
| • memory exception (ERROR level) |
|
| The Syslog uses USER facility. In addition to standard Syslog payload, it contains |
|
| the following components: GS_LOG: [device MAC address][error code] error |
|
| message. |
|
| For example: May 19 02:40:38 192.168.1.14 GS_LOG: [00:0b:82:00:a1:be][000]. |
|
| Ethernet link is up. |
|
|
|
|
|
|
| Send SIP Log | When setting the “Yes”, phone will send out SIP Log to syslog server. Default |
|
| setting is “No”. |
|
|
|
|
|
|
| NTP server | This parameter defines the URI or IP address of the NTP (Network Time Protocol) |
|
| serve. It is used to display the current date/time. |
|
|
|
|
|
|
| Allow DHCP Option 42 | Default is “Yes”. This allows device gets provisioned for DHCP Option 42 from the |
| to override NTP server | server automatically. |
|
|
|
|
|
|
| SSL Certificate | This defines the SSL certificate needed to access certain websites. |
|
|
|
|
|
|
| SSL Private Key | This defines the SSL Private key. |
|
|
|
|
|
|
| SSL Private Key | This defines the SSL private key password. |
| Password |
|
|
|
|
|
|
|
| Distinctive Ring Tone | Caller ID must be configured. Select a Distinctive Ring Tone 1 through 3 for a |
|
| particular Caller ID. The GXP1100/1105 will ONLY use selected ring tones for |
|
| particular Caller IDs. For all other calls, the GXP1100/1105 will use System Ring |
|
| Tone. When selected and no Caller ID is configured, the selected ring tone will be |
|
| used for all incoming calls. |
|
|
|
|
|
|
| System Ring Tone | System ring tone. Default is North American standard. |
|
| Adjust system ring tone frequencies and cadences based on local telecom |
|
| standard. |
|
|
|
Grandstream Networks, Inc. | GXP1100/1105 User Manual | Page 18 of 29 |
| Firmware version: 1.0.1.80 | Last Updated: 07/2011 |
