Configuring Phone Lines and Calling Routing Behavior

4

 

Configuring Dial Plans

 

 

 

 

 

Syntax for the Interdigit Short Timer

SYNTAX 1: S:s, ( dial plan )

Use this syntax to apply the new setting to the entire dial plan within the parentheses.

SYNTAX 2: sequence Ss

Use this syntax to apply the new setting to a particular dialing sequence.

s: The number of seconds; if no number is entered after S, the default timer of 5 seconds applies.

Examples for the Interdigit Short Timer

Set the timer for the entire dial plan.

EXAMPLE: S:6, (9,8<:1408>[2-9]xxxxxx 9,8,1[2-9]xxxxxxxxx 9,8,011xx. 9,8,xx.[1-8]xx)

S:6, While entering a number with the phone off hook, a user can pause for up to 15 seconds between digits before the Interdigit Short Timer expires. This setting is especially helpful to users such as sales people, who are reading the numbers from business cards and other printed materials while dialing.

Set an instant timer for a particular sequence within the dial plan.

EXAMPLE: (9,8<:1408>[2-9]xxxxxx 9,8,1[2-9]xxxxxxxxxS0 9,8,011xx. 9,8,xx.[1-8]xx)

9,8,1[2-9]xxxxxxxxxS0With the timer set to 0, the call is transmitted automatically when the user dials the final digit in the sequence.

Editing Dial Plans

You can edit dial plans and can modify the control timers.

Editing the System Dial Plan

Follow this procedure to edit the system dial plan, which will be auto-provisioned to the first extension of each phone.

STEP 1 Connect to the SPA9000 administration web server, and choose Admin access with Advanced settings.

STEP 2 Click Voice tab > SIP.

SPA9000 Voice System Administration Guide

74

Page 76
Image 76
Cisco Systems SPA9000 Editing Dial Plans, Syntax for the Interdigit Short Timer, Examples for the Interdigit Short Timer