–
FIGURE 4 | FIGURE 5 | FIGURE 6 |
Wrap the power cord from the core storage area on the base of the blender until the cord is the length you desire. (Figure 5)
Place jar assembly onto base. (Figure 6)
Place ingredients into jar.
Place lid with feeder cap on jar.
Plug the power cord into a 120 Volt AC electrical outlet.
PUSHBUTTON MODELS
Slide switch to HIGH or LOW (If your model does not have a slide switch, push HIGH or LOW button.)
Push desired speed and blend ingredients to desired consistency.
Push OFF to stop the blender and turn blender off.
To use PULSE, select HIGH or LOW. Push PULSE and hold down for desired length of time. Release PULSE and allow blade to stop. Repeat cycle as desired.
DIAL MODELS WITHOUT TIMER
Turn dial to desired food/drink selection.
Press ON and blend ingredients to desired consistency.
Press OFF to stop the motor and turn blender off.
Note: Food/drink selection can be changed during blending by turning the dial to the desired selection.
Note: This blender is programmed to turn the power off automatically if not used for a period of several minutes.
To use PULSE, turn dial to desired food/drink selection. Press PULSE and hold down for desired length of time. Release and allow blade to stop. Repeat cycle as desired.
