–
DIAL MODELS WITH TIMER
PRESS POWER TO TURN THE BLENDER ON.
The blender is set to the food/drink selection identified by a blinking indicator light. Turn dial to change the food/drink selection.
Press START and blend ingredients to desired consistency.
Press STOP to stop the motor. (Pressing POWER stops the motor and turns the blender off.)
Note: Food/drink selection can be changed during blending by turning the dial to the desired selection.
Note: This blender is programmed to turn the power off automatically if not used for a period of several minutes.
To use PULSE, turn dial to desired food/drink selection. Press PULSE and hold down for desired length of time. Release and allow blade to stop. Repeat cycle as desired.
To use Auto Blend™ Timer, press BLEND TIME until desired length of blending time (15, 30, 45, 60 seconds) is illuminated.
Turn dial to desired food/drink selection.
Press START. Blender will automatically stop when selected time has elapsed, or if food/drink selection is changed.
To stop blender before elapsed time, press STOP.
To use blender without timer, press BLEND TIME until no lights are illuminated.
BLENDING TIPS
• Put liquids in the jar first, unless a recipe says otherwise.
• Crushing ice: Crush 6 ice cubes or approximately 2 cups of ice at a time.
• Do not remove the lid while in use. Remove feeder cap to add smaller ingredients. (Figure 7)
•Cut all firm fruits and vegetables, cooked meats, fish and seafood into pieces no larger than 1/2 inch
(1.8 cm) to 1 inch (2.5 cm). Cut all kinds of cheeses into pieces no larger than 1/2 inch (1.8 cm).
FIGURE 7
•This blender will not mash potatoes, whip egg whites or substitute dairy toppings, mix stiff dough or grind raw meat.
