Cisco Systems SPA9000 manual Subscriber Information section, Dial Plan section

SPA9000 Field Reference

Voice tab

B

Referor Bye Delay	Controls when the SPA9000 sends BYE to terminate stale call
	legs after completion of call transfers. Multiple delay settings
	(Referor, Refer Target, Referee, and Refer-To Target) are
	configured on this screen. For the Referor Bye Delay, enter
	the appropriate period of time in seconds.
	Default: 4
Refer Target Bye Delay	For the Refer Target Bye Delay, enter the appropriate period
	of time in seconds.
	Default: 0
Referee Bye Delay	For the Referee Bye Delay, enter the appropriate period of
	time in seconds.
	Default: 0
Refer-To Target Contact	To contact the refer-to target, select yes. Otherwise, select
	no.
	Default: no
Sticky 183	If this feature is enabled, the IP telephony ignores further 180
	SIP responses after receiving the first 183 SIP response for
	an outbound INVITE. To enable this feature, select yes.
	Otherwise, select no.
	Default: no

Voice tab > FXS 1/2 page

Subscriber Information section

Display Name	Display name for caller ID.
User ID	Extension number for this line.

Voice tab > FXS 1/2 page

Dial Plan section

Dial Plan

Dial plan script for this line.

SPA9000 Voice System Administration Guide 244